Hi Matt,

Great software and I love all of your updates.

Few questions -

1. I have edited the depth of points in my tracks using both the drag individual point and the pencil edit tool and they both work great. When I export the data in cvs. format all the depth data shows the new edited values. But when I watch the sonar view of the track, it still has the old unedited values in it. Is there some way to refresh the data so that the new edit values show up in the box?

I added an image showing the problem. The depth should be >0.5ft but is reading 2.15 ft. the data was edited and show on the dots correctly, but has the old depth reading. I was sitting on a sandbar and the sonar does not read shallower than 1.5 ft. It is easy to see the issue here, but it also occurs where I edit at depth but it is harder to show as a picture.

2. Can I move the position of the information box described above? It shows up in the upper left-hand corner and would be nice in the lower left corner for me.

3. Is there a way to turn off the tool bar that along the top and left-hand side of the map window?

Questions 2 and 3 are related to making the display window perfect to copy as a movie file to add in with other sensor data we collect. Question 1 is really my problem the other question are just "it would be nice if" things.

Thanks again,
Jim

Think I found the problem to #1. I just had to close out and reopen the project. It works fine now. Can't believe I didn't try that first.

Good deal, still wondering about question #2 and 3.

Jim

Hi Matt,

This problem has started again and I can't get the corrected data to show up in the data box. I have restarted the program and computer, but the edited depth data is reflected in the position of the point, but the original data shows in the data box on top of the sonar view. Any suggestions?

Jim
JPinTN wrote:

This does sound like a bug. I will investigate.