Hi,

Can someone explain to me why the shallow isolines (A ground) for this place is not showing up in the generated map?

Br
Bjorn Kallin

That's an odd one Bjorn, because the line near the 1 contour on the contour map looks very much like a shoreline/island. I can't think of any other way it could have been generated like that, and it would also explain why there is no colour there. Is this definitely not the case? Would be interested in seeing more of the map if you can post some more screen shots.

Yes the line close to the 1m contour line is a shoreline but the problem is where I put the waypoint.

There is a lot of trackpoints witch is below 2m close to the waypoint but on the generated map the waypoint is between 4 and 3m contour line.
Should it not be a contour line at 2m there?

Ah, OK. This is likely because you have smoothing set so high, so this feature is being eroded somewhat. Try with a lower smoothing value (<10).

Thanks Matt the made the diffrence!

I put it to 1 and the 4m became 3m and a small 2m apperd inside the 3m.