Welcome, Guest
Username: Password: Remember me

TOPIC: Problem displaying vector maps at low zoom level

Problem displaying vector maps at low zoom level 12 years 2 months ago #3499

  • Markus
  • Markus's Avatar
  • Offline
Hi!
When I view my vector maps on different units the zoom level at which the colours start showing differs a lot. On a HDS 5 gen 2 the colours show up at the 2 km level (2 km on the scale in the right lower corner), on my HDS 7 gen 1 I have to zoom to 200 m before the colours show, and on a Simrad NSE 12 I have to zoom to 20 m, which is way too much to be useful. Is there any setting in Reefmaster I can play with to change visible zoom levels on vector maps?
Best regards,
Markus
Last Edit: 12 years 2 months ago by Markus. Reason: typo
The administrator has disabled public write access.

Problem displaying vector maps at low zoom level 12 years 2 months ago #3506

  • Matt
  • Matt's Avatar
  • Offline
Hi Markus,
The point at which features become visible in an AT5 map is determined by the U_LIMIT attribute, which is always set to 19 for RM map exports. This value is the split point between "large" (detail) and "medium" map features and corresponds to approximately 90 (mercator) metres per pixel. I'm surprised that your map is not becoming visible at all until you reach a 20m zoom level, and unfortunately at the moment you can't change this field in RM. If you are comfortable working with Shapefiles in QGis (or equivalent) then you could export your map as Shapefiles and modify this field yourself, to a higher value. You could try 28, which is the split point between medium and large.at5. Note that at these high levels, you map will start to obscure a significant portion of the basemap.
This is probably a good question to ask over on the IMC support forum - link at top of this forum section.

Matt
The administrator has disabled public write access.

Problem displaying vector maps at low zoom level 12 years 2 months ago #3511

  • Markus
  • Markus's Avatar
  • Offline
Thanks for the information Matt. The problem seems to be connected with the Simrad NSE 12. I tried the map on a Simrad NSS Evo2 and it displays the map properly.
Markus
The administrator has disabled public write access.

Problem displaying vector maps at low zoom level 12 years 2 months ago #3580

  • Markus
  • Markus's Avatar
  • Offline
Disabling shaded relief solved this issue. Now the map displays at the 5 km zoom level on all units I've tried it on (and set SR to off/select2D).
The administrator has disabled public write access.
SCROLL TO TOP