Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Problem with specific values in manual water level

Problem with specific values in manual water level 11 years 3 months ago #3117

  • Mats
  • Mats's Avatar
  • Offline
The important thing is that RM handles 2DP internally, so I am happy with that.

But for the sake of good order, isn't it very strange that when I enter either of the two specific values 0.57 or 0.58 m, then RM changes the value with -0.01
And this happens only for those two values, what I have seen so far. Other values work as they should, and I can see the correct value with 2DP.

//Mats
The administrator has disabled public write access.

Problem with specific values in manual water level 11 years 3 months ago #3122

  • Matt
  • Matt's Avatar
  • Offline
Hi Mats,
I actually misunderstood before, and thought you were talking about the new "Water level" field in the track properties section. I can see the effect you are talking about now in the tide point entry field, and will fix it up when we get a chance. Just to reiterate that this is not an issue with the value, just the display.
Matt
The administrator has disabled public write access.

Problem with specific values in manual water level 11 years 2 months ago #3174

  • Mats
  • Mats's Avatar
  • Offline
ok, perfect

Thanks
//Mats
The administrator has disabled public write access.

Problem with specific values in manual water level 11 years 2 months ago #3177

  • Heiko
  • Heiko's Avatar
  • Offline
I have problems with the water level. The water level of my lake changes in the course of the year about 20 to 25 meters. With DRD it was no problem to adjust the right water level. Please look at the foto, there you can see that there is an option to adjust the level. Is it possible to integrate that function in RM?
Attachments:
The administrator has disabled public write access.

Problem with specific values in manual water level 11 years 2 months ago #3178

  • Matt
  • Matt's Avatar
  • Offline
Heiko,
Do you want to change the water level of each track, or adjust the overall depth of a finished map?
The former is easy in RM - just use the "Water level" value under Track Properties or, alternatively, use a manual Tide Station. Entering a single value as a tide offset will result in that value being used for all points in the track.

For adjusting the depth levels in a mapped project: that is not yet possible in RM, but we are adding it soon.

Matt
The administrator has disabled public write access.

Problem with specific values in manual water level 11 years 2 months ago #3179

  • craigm
  • craigm's Avatar
  • Offline
Matt wrote:

For adjusting the depth levels in a mapped project: that is not yet possible in RM, but we are adding it soon.

Matt

Great! Looking forward to this one.

Craig
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
SCROLL TO TOP