Welcome, Guest
Username: Password: Remember me

TOPIC: Need some help with SAS to Insight Map Creator

Need some help with SAS to Insight Map Creator 12 years 2 months ago #3538

  • leelee
  • leelee's Avatar
  • Offline
HI guys.

New to this site as I have just starting to gain an interest in alternative methods for mapping et and I was told that this site has

I have done a bit of research and I am attempting to overlay some satellite images onto my Lowrance Touch.

Now for the life of me I have tried everything but I keep getting errors with Insight Map Creator.

So here are my steps

1. Download the required zoom levels from sas (i'm using 14-20)
2. Converting to KML
3. Upload KML through IMC
4. Then switch to Raster in IMC and select the cache files to use
5. Select min res = 1 max res = 32
6. IMC always fails and tells me "Critical Error: Index not found"

The weird thing is I have a mate doing the same thing with the same versions of SAS and IMC and it works for him.

Anyone have any ideas?

I have heard there is a forum regular who created IMC who works for Lowrance and I was hoping he might be bale to help out a fellow Lowrance person (I am a pro-staffer for them)

Also just wanted to let everyone know that i have done a fair amount of research and trial and error in trying to resolve this issue and I have not just put this post up because "its all to hard etc", as I have tried to problem solve this issue, but I I have literally hit a brick wall.

Cheers

Lee
The administrator has disabled public write access.

Need some help with SAS to Insight Map Creator 12 years 2 months ago #3541

  • Charles1960
  • Charles1960's Avatar
  • Offline
Are you using jpg as your raster format as this solved my problems,I believe KML supports a number of raster formats however only has jpg worked for me.
For the resolution I find 2 to 8 is sufficient for my needs.
One warning if your using the 2003 data when a lot of Australian dams were low its not as accurate as latter years.
I've not had a great deal of luck with the SAS program but have used DRDepth and Globalmapper files converted to work on my HDS5 Gen 2, as soon as sidescan is a feature I'll get into Reefmaster for sure.
Regards Charles
The administrator has disabled public write access.

Need some help with SAS to Insight Map Creator 12 years 2 months ago #3549

  • leelee
  • leelee's Avatar
  • Offline
Charles1960 wrote:
Are you using jpg as your raster format as this solved my problems,I believe KML supports a number of raster formats however only has jpg worked for me.
For the resolution I find 2 to 8 is sufficient for my needs.
One warning if your using the 2003 data when a lot of Australian dams were low its not as accurate as latter years.
I've not had a great deal of luck with the SAS program but have used DRDepth and Globalmapper files converted to work on my HDS5 Gen 2, as soon as sidescan is a feature I'll get into Reefmaster for sure.
Regards Charles

Thanks Charles.

I downloaded the new version of IMC last night and for some reason it now works an i can produce Bound AT5's

Cheers

Lee
The administrator has disabled public write access.
SCROLL TO TOP